Call us to order now on 01472 269 898

All Major Cards Accepted * Cut To Size Service * Nationwide Delivery

MetaGuard Overlaminates

MetaGuard 700 - Premium Grade PVC Overlaminates

Recommended for MetaMark MD5, and as a matched overlaminate prevents tunnelling or delamination. The 70 micron polymeric film gives a high level of abrasion resistance and contains UV stabilisers. It can be used on flat or gently curved surfaces, such as vehicle graphics. It is available in Gloss or Satin finish. Fire rating Class B (BS EN 13501 - 1:2007). MetaGuard 700 features the latest Apex adhesive.

  • 70 micron polymeric vinyl
  • Solvent based adhesive
  • Layflat PE liner
  • Fire rating Class B
  • Protects prints from abrasion and UV

MG-705 - Gloss

MG-703 - Satin

MG-702 - Matt

Resistance Values:

Abrasion High
UV Fading Medium
Chemical/Graffiti Low

Available in 25m and 50m rolls.

Roll widths 760mm, 1370mm, 1520mm and 1600mm.

MetaGuard X - Digital Wrapping Overlaminate

A 50 micron ultra-extensible and conformable, soft PVC overlaminate. Matched to Metamark MD-X digital wrapping media, this system provides assurance of dimensional stability and trouble free application over 3D surfaces, compound curves and recesses. The Apex assured solvent based adhesive delivers high performance and is suitable for cold overlamination. Finishing prints with MetaGuard X prevents abrasion and extends colour fastness.

  • 50 micron ultra conformable overlaminate
  • Apex solvent based adhesive
  • Durability 7 years (unprinted)
  • Protects prints from abrasion and UV

MG-X-005 - Gloss

MG-X-003 - Satin

Resistance Values:

Abrasion High
UV Fading Medium
Chemical/Graffiti Low

Available in 25m and 50m rolls.

Roll widths 760mm, 1370mm and 1600mm (this can be slit to 1520mm if required).

MetaGuard 900 - Vehicle Wrap Cast Vinyl Overlaminate

A cast 53 micron highly conformable vinyl overlaminate. This clear gloss vinyl is suitable for vehicle wrapping or application over demanding surfaces and provides a matched system with Metamark MD7.

  • 53 micron cast vinyl
  • Solvent based adhesive
  • Layflat PE liner
  • Protects prints from abrasion and UV
  • Highly conformable for vehicle wraps

MG-905 - Gloss

Resistance Values:

Abrasion High
UV Fading Medium
Chemical/Graffiti Low

Available in 15m and 45m rolls.

Roll widths 760mm, 1370mm and 1520mm.

MetaGuard 395 - Intermediate Grade PVC Overlaminate

MetaGuard 305 is recommended for Metamark MD3, and as a matched overlaminate prevents tunnelling or delamination. The 70 micron monomeric film gives a high level of abrasion resistance and contains UV stabilisers. It can be used on flat or gently curved surfaces, such as vehicle graphics. Fire Rating Class B (BS EN 13501-1:2007). MetaGuard 305 features the latest Apex adhesive.

  • 70 micron monomeric vinyl
  • Solvent based adhesive
  • Layflat PE liner
  • Fire rating Class B
  • Protects prints from abrasion and UV

MG-305 - Gloss

Resistance Values:

Abrasion High
UV Fading Medium
Chemical/Graffiti Low

Available in 25m and 50m rolls.

Roll widths 760mm, 1370mm, 1520mm and 1600mm.

MetaGuard 302 - Intermediate Grade PVC Overlaminate

MetaGuard 302 matt overlaminate is matched to Metamark MD3, providing protection from abrasion and UV. The anti-reflection finish is ideal for indoor applications with overhead lighting. It can be applied to flat or gently curved surfaces and has a Class B Fire Rating. MetaGuard 302 now has greater improved clarity, maximising the definition of colour vibrancy of your prints. MetaGuard 302 features the latest Apex adhesive.

  • 70 micron monomeric vinyl
  • Solvent based adhesive
  • Layflat PE liner
  • Fire rating Class B
  • Protects prints from abrasion and UV

MG-302 - Matt

Resistance Values:

Abrasion High
UV Fading Medium
Chemical/Graffiti Low

Available in 25m and 50m rolls.

Roll widths 760mm, 1370mm, 1520mm and 1600mm.

MetaGuard MGE - Promotional Grade PVC Overlaminate

A promotional grade 1-2 year monomeric calendered overlaminate matched to Metamark MDE. Suitable for short term applications, such as point of sale signage, exhibition, display and other applications onto most flat surfaces. Fire Rating Class B (BS EN 13501-1:2007).

  • 70 micron monomeric vinyl
  • Permanent adhesive (solvent free)
  • Fire rating Class B
  • Protects prints from abrasion and UV

MGE-305 - Gloss

Resistance Values:

Abrasion High
UV Fading Medium
Chemical/Graffiti Low

Available in 50m rolls.

Roll widths 760mm, 1370mm and 1520mm.

MetaGuard 620 - Optically Clear Polyester

Provides maximum UV protection and exhibits good anti-graffiti properties. This super thin 25 micron polyester has a high gloss finish and clear adhesive with UV inhibitors offering enhanced colour definition of prints. It is suitable for use on flat glass only. It provides a matched system for overlaminating Metamark Clear Vision.

  • 25 micron high gloss polyester
  • Crystal clear solvent based adhesive
  • For use on flat surfaces only (non-conformable)
  • Protects prints from abrasion and UV
  • Also provides modest protection from graffiti

MG-620 - High Gloss

Resistance Values:

Abrasion High
UV Fading High
Chemical/Graffiti High

Available in 25m and 50m rolls.

Roll widths 760mm, 1370mm and 1520mm.

MetaGuard 670 - Optically Clear Cast Overlaminate

MetaGuard 670 is an optically clear cast overlaminate, for use on Clear Vision. The conformable 40 micron cast film allows application to curved glass, while providing UV and abrasion resistance.

  • 40 micron cast PVC
  • High gloss finish
  • Crystal clear solvent based adhesive
  • Protects prints from abrasion and UV
  • Slightly conformable - for use on curved glass

MG-670 - High Gloss

Resistance Values:

Abrasion High
UV Fading Medium
Chemical/Graffiti Low

Available per linear metre.

Widths available 760mm, 1370mm and 1520mm.

MetaGuard 400 - Lexan Anti-Scuff Polycarbonate Overlaminate

This product provides a matched system when used with Metamark pop up display polyester. It has a satin crystal finish, enhancing the appearance of the print, as well as providing excellent scuff resistance and additional rigidity to the flexible display panels. The 75 micron polycarbonate product has a polyester liner and crystal clear adhesive to provide added vibrancy to the print.

  • 75 micron Lexan polycarbonate
  • Water clear adhesive
  • Anti-reflection crystal finish
  • High scuff resistance

MG-403 - Satin

Resistance Values:

Abrasion Very High
UV Fading Medium
Chemical/Graffiti Low

Available in 10m and 20m rolls.

Roll widths 914mm and 1270mm.

MetaGuard 500 - Floor Graphic Overlaminate

This overlaminate is scuff resistant to withstand regular traffic and has an anti-slip coating to meet with the health and safety needs of a floor product used in public spaces. The product is warranted for indoor use only, in public spaces and must be used with Metamark MD-FG floor vinyl as part of a matched system. Use of any other laminate voids any public warranty.

  • 200 micron embossed PVC
  • Anti-slip finish
  • Highly scuff resistant floor overlaminate
  • MUST be used as a matched system with MD-FG print media

MG-502 - Matt

Resistance Values:

Abrasion Very High
UV Fading Medium
Chemical/Graffiti Low

Available in 5m and 25m rolls.

Roll widths 675mm and 1350mm.

MetaGuard 850 - Anti-Graffiti PVDF Overlaminate

MetaGuard 850 anti-graffiti film provides maximum protection. The 50 micron PVDF film offers a very high level of colour stability from UV and protection from graffiti, chemicals and abrasion. It can be applied onto flat or slightly curved surfaces. Refer to the data sheet for cleaning recommendations.

  • 50 micron PVDF
  • Clear solvent based adhesive
  • Protects prints from abrasion and UV
  • Protection from graffiti and chemicals

MG-850 - Gloss

Resistance Values:

Abrasion High
UV Fading High
Chemical/Graffiti Very High

Available per linear metre.

Widths available 685mm, 1220mm and 1370mm.

MetaGuard 200 - Dry Wipe (White Board) Overlaminate

This dry wipe overlaminate can be applied over printed Metamark digital media such as MD3, to create dry wipe panels with permanent base graphics. The product is suitable for use with dry wipe marker pens, for indoor use only. The clear coated film wipes clean with a dry cloth.

  • 25 micron polypropylene
  • Indoor use
  • For use with dry wipe marker pens

MG-205 - Gloss

Resistance Values:

Indoor use only in respect of abrasion, UV fading and chemical/graffiti damage.

Available in 15m and 45m rolls.

Roll widths 645mm and 1295mm.

Please contact us for further details.

Need help? We're here for you!
Email us or please call 01472 269 898

If you would like help or more information about any of our products,
please do not hesitate to contact us

Get In Touch

Join Our Mailing List

Sign up to our exclusive mailing list for the latest industry news and special offers