Etched Glass Effect Films

From the Avery Dennison Corporation come these 2 decorative window vinyls.  Both feature 80micron polymeric face films together with solvent adhesives that allow the graphics to be applied wet without the risk  of adhesive milking.

 

7000C Seriglass Frosted has a frosted appearance similar to Mactac's 798-01 Frosted

7000D Seriglass Dusted has a dusted has a dusted look similar to Mactac's 798-02 Dusted

 

Width	Colour	25, 50M rolls
610mm	7000C Frosted & 7000D Dusted
1230mm	7000C Frosted & 7000D Dusted

An impressive range of 80micron frosted and dusted polymeric decorative glass films from MACtac.

The 700 series includes 5 tinted colours in addition to 798-01 clear frosted and 798-02 clear dusted.

 

610mm	700 Series: All Colours
1230mm	700 Series: All Colours
1524mm	700 Series (798-01 and 798-02 only

 

 

OC100 Opal Crystal 3 years outdoor

Developed as a lower cost version of LA8082.  It features a heavily flaked calendered PVC film to imitate a sandblasted finish and has real sparkle at various viewing angles making window graphics really come to life.  The solvent acrylic permanent adhesive can be applied wet with no adhesive milking and the release liner is coloured yellow to make weeding easier.  OC100 allows more natural light through than any other of our window films making it ideal in less well lit locations whilst retaining good privacy values and at a price that fits most pockets.  OC100 is best viewed through the adhesive side making it ideal for application for the inside of windows when it will be viewed from the street.  It also retains its sparkle under a wider range of lighting and viewing angles than our LA8082 product.

 

610mm	Opal Crystal
1230mm	Opal Crystal

 

 

Apply your decorative window films dry with these 2 new etch films.  AF80 Frosted is an 80micron polymeric etch vinyl that is an easy-to-apply version of the other frosted vinyls we sell.  AF80 Frosted has an 'air-free' structured semi-permanent adhesive than can be removed from most glass up to 1 year after application with no adhesive residue.  The 'air-free' adhesive allows the air trapped in dry application to escape easily leaving a bubble free finish.  AF80 frosted can be applied dry without the use of a liquid so fitting times are greatly reduced and application tapes can be stripped quicker than if applied wet.  The adhesive channels are not visible after application and it cuts and weeds the same as an ordinary etch film.  AS80 Silver has the same 'air-free' removable adhesive and other properties but with a silver tinted face film.  Recommended for dry application only.

 

610mm	Frosted and silver
1260mm	Frosted and silver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Back to Top